• Original 383 cubic inch Magnum V8
  • Correct exhaust system
  • Original Chrysler A833 4-speed manual transmission
  • Correct Chrysler 8.75-inch axle
  • 14-inch steel wheels
  • Correct Black Velvet paint
  • Correct Black & White interior
  • Fully documented

It doesn't take long for car guys to put 383 and 1320 together. While Chrysler may have intended Mopar-branded pony cars to be small block-powered curve carvers, their conservative proportions and relative light weight equaled lethal stoplight potential that just couldn't be ignored. And this 383 'Cuda is one of such 'balanced' performer that trades a nose-heavy Hemi for something a bit more rounded. Dressed in some of the most sinister livery Auburn Hills has ever created, this striking Plymouth has a bold look that presents as new thanks to a professional, ground-up restoration. The car is fully documented, retaining a numbers-matching drivetrain and all-original sheetmetal. And, with an excellent combination of provenance and personality, it presents the perfect opportunity to kick off a serious muscle car collection!

Speaking of provenance and personality, here's a detailed look at this 'Cuda's glossy fender tag:

* E65: 383 cubic inch V8
* D21: Heavy duty 4-speed manual transmission
* B: Plymouth Barracuda
* S: Special
* 23: 2-door hardtop
* N: 383 cubic inch V8 that utilizes 1 4-barrel carburetor to create 300 horsepower
* 1: 1971 model year
* B: Assembled at Dodge Main in Hamtramck, Michigan
* 272782: Production sequence number
* TX9: Black Velvet paint
* H: High trim grade
* 6: Vinyl bucket seats
* XW: Black & White interior
* 000: Full door panels
* 125: Assembled on January 25th, 1971
* E33171: Order number
* V1X: Black vinyl top
* C16: Console
* C55: Bucket seats
* J45: Hood pins
* J54: Sport Hood
* M21: Drip rail moldings
* M25: Wide sill moldings
* M31: Belt & hood moldings
* M88: Quarter panel tape stripes
* N41: Dual exhaust
* N42: Chrome exhaust tips
* R11: Music Master AM radio
* EN: End of codes
* 2: Assembly line 2

With most classics, a single element usually catches your eye long before anything else. But with this Plymouth, EVERY piece works together to create a virtual symphony of automobilia. With a solid hardtop body that features 100% original sheetmetal, this is the kind of car that would turn heads in primer; and what better way to ensure sore neck muscles than covering it in correct Black Velvet two-stage? That paint coats fit and finish which puts factory-original cars to shame. That fit and finish is augmented by slick white accents which recreate traditional Mopar markings. And to ensure this 'Cuda isn't just another fish in the sea, every one of its facets was buffed to a show-stopping shine!

Unlike most dressed and decaled cars, which tend to throw good taste out the window, this awesome E-Body seamlessly balances a serious demeanor with flashy good looks. At the front of its broad shouldered body, a stainless-trimmed, 1971-exclusive grille hangs four halogen headlights above a showroom-fresh bumper and clear, sculpted parking lamps. At the top of that grille, a “'Cuda 383” branded hood props two stainless lanyards and a small “PLYMOUTH” script in front of like-new glass, clean stainless trim and Black Velvet mirrors. At the sides of that hood, satin door handles and stylish fender vents ride above fresh wheel lips, straight rocker trim and a trademark Chrysler pentastar. And at the back of the car, a Satin Black valence hangs a cool “'Cuda by PLYMOUTH” emblem between clear tail lights, a second chrome bumper and correct exhaust tips.

Hoist this Mopar's awesome hood and you'll find an original, 383 cubic inch Magnum V8 that hangs a familiar 2468130 casting number between an October (10) 7th (7) of 1970 (70) casting date and matching partial VIN. Almost as popular Plymouth's famed Super Commando, and just as storied, Chrysler's mighty Magnum V8 was designed to be a great combination of thrift and performance. At the top of the stout mill, an American-made carburetor breathes through a correct air cleaner that's covered in a striking combination of fresh Organisol and traditional lettering. Below that carburetor, a spotless orange block wears familiar steel valve covers and professionally restored exhaust manifolds. The big engine's fires are lit by 7mm Standard wires, a reproduction Chrysler voltage regulator and a proven points distributor. And cooling is provided by a beefy Chrysler radiator, which is augmented with authentic squeeze clamps and pliable Chrysler hoses. Take a second to refocus your eyes on the clean engine bay and you'll find details like a correct washer tank, a bright green throttle spring and a familiar red cap battery. And the entire set up, from its fenders to its firewall, is coated in the same TX9 black as the car's glossy exterior panels.

As expected, this 'Cuda's fully sorted chassis is every bit as clean and road-ready as its solid body and throaty engine. A rugged A833 4-speed, which is branded with a matching partial VIN, churns power to a tough Chrysler rear end. Included in the restoration was a completely rebuilt suspension that, when combined with correct manual steering, helps the car hook up quick and perform great. Braking, which is surprisingly competent for a 43 year old design, comes courtesy of four beefy drums. Spent gases are escorted rearward by aluminized, true-dual pipes that roar through deep turbo mufflers and fantastic resonators. At the corners, 14-inch steelies spin fresh F70-14 Goodyear Polyglas Custom Wide Treads around stainless center caps. And, aesthetically, the bottom of this super cool Plymouth is cased and ready to roll, with over-restored floors framing a roster of proven components.

Swivel this 'Cuda's solid-closing doors and you'll find a correct two-tone interior that's functional, straightforward and very livable. The front bucket and rear bench seats are covered in crack-free vinyl that displays very few signs of wear. Below those seats, stain-free carpet centers thick rubber floor mats on a wood-trimmed console and Hurst pistol grip shifter. At the sides of that carpet, sculpted panels proudly hang the Cuda name above traditional window cranks, integrated door handles and cool chrome locks. In front of those panels, a clean black dash props rebuilt factory gauges above a familiar Chrysler Solid State. Above that dash, a fresh headliner frames a fully functional courtesy lamp. In front of the driver, an attractive, wood-rimmed steering wheel mixes subtle form with major function. And behind the passengers, a fully restored trunk hangs a correct decklid decal above a new mat, new jack and new spare tire.

This impressive coupe's sale includes two original broadcast sheets, original marketing materials and an album of restoration photos.

Thanks to its solid restoration, exceptional performance and classic good looks, this 'Cuda is poised to please even the most discerning muscle car enthusiast. Fully sorted in every way, you can drive it, show it and take home a few trophies, all for about half the price of a 'ropes and red carpet' Hemi. If you've been searching for an awesome Mopar to cherish AND enjoy, you've found your next car!

This vehicle has been sold. Fill out the form below to be contacted by RK Motors when a similar vehicle is available!

$299.00 Dealer Administrative Charge is not included in advertised price. All prices and offers are before state, city and county tax, tag, title and license fees. Out of state buyers are responsible for all state, county, city taxes and fees, as well as title/registration fees in the state that the vehicle will be registered. Dealer not responsible for errors and omissions; all offers subject to change without notice, please confirm listings with dealer.

Please note: Your vehicle may require Vehicle Identification Number (VIN) verification and/or safety and emissions inspections to transfer ownership and register the Vehicle in the declared State of residence. In most States, such requirements are dependent on the age of the vehicle which varies State by State. We recommend as part of the buying process that you check with your local DMV office to ensure compliance with your declared State of residence’s titling and registration requirements.

Stock # 134640
What Customers Are Saying
Contact Details
Trade Vehicle
Vehicle Information

Make An Offer

1971 Plymouth 'Cuda

Trade in for this 1971 Plymouth 'Cuda

As one of the largest classic car dealerships in the world, we are always looking for new inventory. If you are interested in trading your high quality car for one of ours, simply fill out this form.

A member of our sales department will be in touch within 24 hours. No one makes the trade-in process easier than RK Motors.

Shift - or Control-click (Command on OS X) to select multiple photos

Finance this 1971 Plymouth 'Cuda

Please enter the information below to begin the financing process.

Recent News

A Lead Designer Shares the Inside Track on Cadillac's Project GTP Hypercar

Aug 17 2022

2023 Chevy Silverado ZR2 Bison adds a smidge more capability for $8,295

Aug 16 2022

2023 Dodge Challenger, Charger going out of production in style

Aug 15 2022